Description | MARK ANDY P5 – 430mm (8-colour) Age: 2017 8 Colour (Flexo) Unwind Rewind ProLed System and Dryer Die Cutting BST Powerscope 5000 Inspectionsystem Sheetingstation (Cross) Delam/Relam Cross cutting device 1 delivery belt Mark Andy VPM 400 Panel Mount Machine Meech web cleaning - double sided 2 PitStop trolleys to hold printing cylinder ink trays Impression and magnetic cylinders 48 impression cylinders 7 magnetic cylinders 2 ink trays with non-stick coating Servo-controlled feed unit with closed control loop 1 single-sided unwind for roll diameters up to 40 inches (1016mm), Vertical dancer system, web edge control, closed control loop 1 ultrasonic web edge control with 2 sensors 1 ultrasonic web break control Printing unit: Print and process maximum width 17 inches 431.8 mm Maximum web width 17.25 inches 438.2 mm Min. print processing width 8.5 in 216 mm Min. print processing width with SK material 6.5 in 165 mm Minimum print length 5.5 in. 139.7 mm Maximum print length 24 inches 609.6 mm Minimum die-cut length 10 in. 254 mm Maximum die cut length 24 inches 609.6 mm Tolerances print / print / die cut + - 0,1mm Material Paper and adhesive laminate, PE, PET with liner, 25 to 356 micron Maximum mechanical speed 230m/min. The production speed to be production speed depends on the printing and die-cutting form and the output of the UV system Connection 415 Volt, 50 Hz system Operating instructions in German Toothing flexo printing unit 1/8 inch helical toothing Punching station 1/8 inch straight toothing Cross cutting station 1/8 inch straight toothing This machine is equipped with a remote diagnostic system. To operate this system an internet connection must be provided to operate this system. |